DNP3 Agent
DNP3 (Distributed Network Protocol) is a set of communications protocols that are widely used by utilities such as electric power companies, primarily for SCADA purposes. It was adopted in 2010 as IEEE Std 1815-2010, later updated to 1815-2012.
VOLTTRON’s DNP3 Agent is an implementation of a DNP3 Outstation as specified in IEEE Std 1815-2012. It engages in bidirectional network communications with a DNP3 Master, which might be located at a power utility.
Like some other VOLTTRON protocol agents (e.g. IEEE2030_5Agent), the DNP3 Agent can optionally be front-ended by a DNP3 device driver running under VOLTTRON’s PlatformDriverAgent. This allows a DNP3 Master to be treated like any other device in VOLTTRON’s ecosystem.
The VOLTTRON DNP3 Agent implementation of an Outstation is built on PyDNP3, an open-source library from Kisensum containing Python language bindings for Automatak’s C++ opendnp3 library, the de facto reference implementation of DNP3.
The DNP3 Agent exposes DNP3 application-layer functionality, creating an extensible base from which specific custom behavior can be designed and supported. By default, the DNP3 Agent acts as a simple transfer agent, publishing data received from the Master on the VOLTTRON Message Bus, and responding to RPCs from other VOLTTRON agents by sending data to the Master.
Requirements
PyDNP3 can be installed in an activated environment with:
pip install pydnp3
RPC Calls
The DNP3 Agent exposes the following VOLTTRON RPC calls:
def get_point(self, point_name):
"""
Look up the most-recently-received value for a given output point.
@param point_name: The point name of a DNP3 PointDefinition.
@return: The (unwrapped) value of a received point.
"""
def get_point_by_index(self, group, index):
"""
Look up the most-recently-received value for a given point.
@param group: The group number of a DNP3 point.
@param index: The index of a DNP3 point.
@return: The (unwrapped) value of a received point.
"""
def get_points(self):
"""
Look up the most-recently-received value of each configured output point.
@return: A dictionary of point values, indexed by their VOLTTRON point names.
"""
def set_point(self, point_name, value):
"""
Set the value of a given input point.
@param point_name: The point name of a DNP3 PointDefinition.
@param value: The value to set. The value's data type must match the one in the DNP3 PointDefinition.
"""
def set_points(self, point_list):
"""
Set point values for a dictionary of points.
@param point_list: A dictionary of {point_name: value} for a list of DNP3 points to set.
"""
def config_points(self, point_map):
"""
For each of the agent's points, map its VOLTTRON point name to its DNP3 group and index.
@param point_map: A dictionary that maps a point's VOLTTRON point name to its DNP3 group and index.
"""
def get_point_definitions(self, point_name_list):
"""
For each DNP3 point name in point_name_list, return a dictionary with each of the point definitions.
The returned dictionary looks like this:
{
"point_name1": {
"property1": "property1_value",
"property2": "property2_value",
...
},
"point_name2": {
"property1": "property1_value",
"property2": "property2_value",
...
}
}
If a definition cannot be found for a point name, it is omitted from the returned dictionary.
:param point_name_list: A list of point names.
:return: A dictionary of point definitions.
"""
Pub/Sub Calls
The DNP3 Agent uses two topics when publishing data to the VOLTTRON message bus:
Point Values (default topic: `dnp3/point`): As the DNP3 Agent communicates with the Master, it publishes received point values on the VOLTTRON message bus.
Outstation status (default topic: dnp3/status): If the status of the DNP3 Agent outstation changes, for example if it is restarted, it publishes its new status on the VOLTTRON message bus.
Data Dictionary of Point Definitions
The DNP3 Agent loads and uses a data dictionary of point definitions, which are maintained by agreement between the (DNP3 Agent) Outstation and the DNP3 Master. The data dictionary is stored in the agent’s registry.
Current Point Values
The DNP3 Agent tracks the most-recently-received value for each point definition in its data dictionary, regardless of whether the point value’s source is a VOLTTRON RPC call or a message from the DNP3 Master.
Agent Configuration
The DNP3Agent configuration file specifies the following fields:
local_ip: (string) Outstation’s host address (DNS resolved). Default:
0.0.0.0
.port: (integer) Outstation’s port number - the port that the remote endpoint (Master) is listening on. Default: 20000.
point_topic: (string) VOLTTRON message bus topic to use when publishing DNP3 point values. Default:
dnp3/point
.outstation_status_topic: (string) Message bus topic to use when publishing outstation status. Default:
dnp3/outstation_status
.outstation_config: (dictionary) Outstation configuration parameters. All are optional. Parameters include:
database_sizes: (integer) Size of each outstation database buffer. Default: 10.
event_buffers: (integer) Size of the database event buffers. Default: 10.
allow_unsolicited: (boolean) Whether to allow unsolicited requests. Default:
True
.link_local_addr: (integer) Link layer local address. Default: 10.
link_remote_addr: (integer) Link layer remote address. Default: 1.
log_levels: (list) List of bit field names (OR’d together) that filter what gets logged by DNP3. Default:
NORMAL
. Possible values:ALL
,ALL_APP_COMMS
,ALL_COMMS
,NORMAL
,NOTHING
.threads_to_allocate: (integer) Threads to allocate in the manager’s thread pool. Default: 1.
A sample DNP3 Agent configuration file is available in services/core/DNP3Agent/config.
VOLTTRON DNP3 Device Driver
VOLTTRON’s DNP3 device driver exposes get_point/set_point RPC calls and scrapes for DNP3 points.
The driver periodically issues DNP3Agent RPC calls to refresh its cached representation of DNP3 data. It issues RPC calls to the DNP3 Agent as needed when responding to get_point, set_point and scrape_all calls.
For information about the DNP3 driver, see DNP3 Driver.
Installing the DNP3 Agent
To install DNP3Agent, please consult the installation advice in services/core/DNP3Agent/README.md. README.md specifies a default agent configuration, which can be overridden as needed.
An agent installation script is available:
$ export VOLTTRON_ROOT=<volttron github install directory>
$ cd $VOLTTRON_ROOT
$ source services/core/DNP3Agent/install_dnp3_agent.sh
When installing the Mesa Agent, please note that the agent’s point definitions must be loaded into the agent’s config store. See install_dnp3_agent.sh for an example of how to load them.